STEELWORKER (SW)
Note: Below are listed responsibilities for grades E-4 (3) and E-7 (c) for this job. Paygrades E-1 through E-3 assist in these tasks
SW3
A. TECHNICAL ADMINISTRATION
A4.001 CONDUCT TOOL KIT INVENTORIES
C. ENVIRONMENTAL PROTECTION
C4.001 PERFORM HAZARDOUS MATERIAL INVENTORIES
D. CONSTRUCTION SUPPORT
D4.001 PREPARE MATERIALS FOR EMBARKATION
E. CONSTRUCTION OPERATIONS
E4.001 FABRICATE REINFORCING STEEL FROM REBAR DRAWINGS
AND BEND SCHEDULES USING BEND TABLES OR
PORTABLE REBAR BENDING UNITS
E4.002 PLACE AND TIE REINFORCING STEEL
E4.003 ERECT METAL CONSTRUCTION SCAFFOLDS
E4.004 CONSTRUCT AND INSTALL BASIC SHORING
E4.005 INSPECT AND STORE FIBER AND SYNTHETIC LINES
E4.006 CLEAN, LUBRICATE AND INSPECT WIRE ROPES
E4.007 DETERMINE SAFE WORKING LOAD OF FIBER AND
SYNTHETIC LINES AND WIRE ROPE
E4.008 TIE VARIOUS KNOTS IN FIBER LINES
E4.009 DETERMINE THE MECHANICAL ADVANTAGES OF BLOCK
AND TACKLE ARRANGEMENTS
E4.010 PERFORM AS A CONNECTOR OR TAGMAN
E4.011 PERFORM STANDARD NAVAL CONSTRUCTION FORCE (NCF)
HAND SIGNALS USED IN EQUIPMENT OPERATIONS
E4.012 HANDLE AND STORE WELDING GASES
E4.013 PERFORM GAS CUTTING ON STEEL PLATES AND PIPES
E4.014 PREPARE JOINTS FOR WELDING AND BRAZING ON STEEL
PLATES AND PIPES
E4.015 PERFORM GAS WELDING AND BRAZING IN ALL
POSITIONS
E4.016 INTERPRET WELDING SYMBOLS ON CONSTRUCTION
DRAWINGS
E4.017 IDENTIFY METALS FOR WELDING USING FIELD TESTING
PROCEDURES
E4.018 PERFORM OPERATOR MAINTENANCE ON ELECTRIC ARC
WELDERS
E4.019 SELECT AND SET-UP EQUIPMENT AND MATERIALS FOR
WELDING AND CUTTING OPERATIONS
E4.020 PERFORM ELECTRIC ARC WELDING ON STEEL PLATES IN
ALL POSITIONS
E4.021 PERFORM BUILD-UP AND WEARFACING OPERATIONS
USING OXYGAS AND METAL-ARC APPLICATIONS
E4.022 PERFORM STRESS RELIEVING OPERATIONS ON FERROUS
METALS
E4.023 ERECT STEEL STRUCTURES USING PROPER TOOLS AND
EQUIPMENT
E4.024 ASSEMBLE PONTOON COMPONENTS
E4.025 PLACE AIRFIELD MATTING
E4.026 APPLY FIELD STRAIGHTENING TECHNIQUES TO DAMAGED
STRUCTURAL SHAPES
E4.027 INSTALL SHEET METAL AND FIBERGLASS DUCT SYSTEMS
G. CONSTRUCTION COMBAT READINESS
G4.001 ADMINISTER FIRST AID UNDER COMBAT CONDITIONS
G4.002 PERFORM AMBUSH COUNTERMEASURES
G4.003 PERFORM SURVIVAL, EVASION, RESISTANCE AND
ESCAPE PROCEDURES
G4.004 PERFORM PRISONER OF WAR HANDLING PROCEDURES
G4.005 INSTALL PROTECTIVE AND TACTICAL WIRE
ENTANGLEMENTS
G4.006 PERFORM CHEMICAL, BIOLOGICAL AND RADIOLOGICAL
(CBR) DEFENSIVE MEASURES
G4.007 PERFORM DUTIES OF GRENADIER
G4.008 PERFORM DUTIES OF THE MACHINE GUN TEAM GUNNER
G4.009 PERFORM DUTIES OF THE ANTITANK TEAM GUNNER
G4.010 PERFORM DUTIES OF THE FIRE TEAM AUTOMATIC
RIFLEMAN
G4.011 PERFORM LAND-BASED COMBAT DUTIES UNDER CBR
CONDITIONS
G4.012 PLACE TRIP FLARES AND OTHER WARNING DEVICES
G4.013 PERFORM BOOBY TRAP COUNTERMEASURES
G4.014 TRANSPORT PERSONNEL INJURED IN COMBAT
G4.015 PERFORM MINOR REPAIRS ON TACTICAL FIELD
TELEPHONE SYSTEMS
G4.016 PERFORM DUTIES OF FIRE DIRECTION CONTROL (FDC)
PLOTTER
G4.017 PERFORM DUTIES OF ASSISTANT GUNNER IN MORTAR
PLATOON
G4.018 PERFORM MORTAR MISFIRE PROCEDURES
G4.019 PERFORM FIELD SANITATION PROCEDURES
H. GRAPHICS
H4.001 DRAW SIMPLE SHOP DRAWINGS AND SKETCHES
I. METAL FABRICATION
I4.001 ESTIMATE MATERIALS BASED ON DIMENSIONS AND
MATHEMATICAL COMPUTATIONS
I4.002 LAY OUT AND FABRICATE SIMPLE SHEET METAL AND
STEEL COMPONENTS
I4.003 MAINTAIN SHEET METAL WORKING EQUIPMENT
SW2
A. TECHNICAL ADMINISTRATION
A5.001 WORK FROM CONSTRUCTION DRAWINGS AND
SPECIFICATIONS
A5.002 PREPARE TIME CARDS
C. ENVIRONMENTAL PROTECTION
C5.001 UPDATE/MAINTAIN SAFETY DATA SHEET FILES
D. CONSTRUCTION SUPPORT
D5.001 COORDINATE BATTALION PROJECT TURNOVERS
D5.002 PERFORM FACILITIES MAINTENANCE INSPECTIONS
D5.003 PERFORM PRECEDENCE DIAGRAMMING
D5.004 PREPARE MANPOWER, MATERIAL, AND EQUIPMENT
ESTIMATES BASED ON CONSTRUCTION DRAWINGS AND
SPECIFICATIONS
D5.005 DEVELOP REINFORCING STEEL BEND SCHEDULES
D5.006 PREPARE CONSTRUCTION ACTIVITY SUMMARY SHEETS
(CASS) AND MASTER ACTIVITY SUMMARY SHEETS BASED
ON CONSTRUCTION ESTIMATES
E. CONSTRUCTION OPERATIONS
E5.001 DIRECT AND COORDINATE INSTALLATION OF ADVANCED
BASED FUNCTIONAL COMPONENT (ABFC) ASSEMBLIES
E5.002 LAY OUT FOR ERECTION OF PRE-ENGINEERED
STRUCTURES
E5.003 DIRECT CREW ENGAGED IN ERECTING PRE-ENGINEERED
STRUCTURES
E5.004 DIRECT CREWS IN THE ASSEMBLY OF PONTOON
COMPONENTS
E5.005 RIG WIRE ROPE WITH CLIPS, SWAGS AND RELATED
EQUIPMENT
E5.006 SPLICE FIBER/SYNTHETIC LINES
E5.007 DIRECT HOISTING OPERATIONS
E5.008 LAY OUT AND DIRECT BUILD-UP AND WEARFACING
OPERATIONS
E5.009 PERFORM PIPE FITTING OPERATIONS
E5.010 PERFORM PIPE WELDING IN ALL POSITIONS
E5.011 WELD FERROUS AND NONFERROUS METALS USING GAS
METAL-ARC (GMA) WELDING PROCEDURES
E5.012 WELD FERROUS AND NONFERROUS METALS USING GAS
TUNGSTEN-ARC (GTA) WELDING PROCEDURES
E5.013 CUT AND SCARF METAL USING CARBON-ARC PROCESS
E5.014 ANNEAL NONFERROUS METALS
E5.015 HARDEN, ANNEAL, NORMALIZE AND STRESS RELIEVE
FERROUS METALS
E5.016 ERECT COMMON HOISTING DEVICES
E5.017 LAY OUT AND FABRICATE FIBERGLASS DUCT SYSTEMS
G. CONSTRUCTION COMBAT READINESS
G5.001 CONDUCT PATROLS
G5.002 PERFORM DUTIES OF FIRE TEAM LEADER
G5.003 PERFORM DUTIES OF MACHINE GUN TEAM LEADER
G5.004 PERFORM DUTIES OF ANTITANK TEAM LEADER
G5.005 EMPLOY CLAYMORE MINES
G5.006 POSITION PERIMETER GUARDS
G5.007 LAY OUT PROTECTIVE AND TACTICAL WIRE
ENTANGLEMENTS
G5.008 LAY OUT TRIP FLARES AND OTHER WARNING DEVICES
G5.009 PERFORM DUTIES OF MORTAR CREW LEADER/GUNNER
G5.010 MANEUVER FIRE TEAM USING ARM AND HAND SIGNALS
H. GRAPHICS
H5.001 PREPARE SHOP DRAWINGS AND SKETCHES
H5.002 PREPARE AS-BUILT DRAWINGS
I. METAL FABRICATION
I5.001 LAY OUT AND FABRICATE STEEL STRUCTURES
I5.002 LAY OUT AND FABRICATE SHEET METAL DUCT SYSTEMS
SW1
A. TECHNICAL ADMINISTRATION
A6.001 CONDUCT PERSONNEL READINESS CAPABILITY PROGRAM
(PRCP) INTERVIEWS
A6.002 ENTER DATA INTO SEABEE AUTOMATED MANAGEMENT
SYSTEM
A6.003 RED LINE CONSTRUCTION DRAWINGS
A6.004 MAINTAIN PROJECT PACKAGES
A6.005 PREPARE WORK REQUESTS AND JOB ORDERS
A6.006 PREPARE SHOP SCHEDULES
A6.007 PREPARE AND MAINTAIN PROJECT PROGRESS CHARTS
A6.008 INITIATE FIELD ADJUSTMENT REQUESTS (FAR's)
C. ENVIRONMENTAL PROTECTION
C6.001 MONITOR ENVIRONMENTAL PROTECTION PROGRAMS FOR
COMPLIANCE WITH CURRENT INSTRUCTIONS
D. CONSTRUCTION SUPPORT
D6.001 SUPERVISE FACILITIES/MAINTENANCE INSPECTIONS
D6.002 PREPARE AND PERFORM CONSTRUCTION NETWORK
ANALYSIS
D6.003 PERFORM DESTRUCTIVE AND NONDESTRUCTIVE METAL
TESTS
D6.004 DIRECT JOBSITE STORAGE OF BUILDING MATERIALS
AND EQUIPMENT
D6.005 SUPERVISE PROJECT TURNOVER OF MATERIALS AND
RELATED EQUIPMENT
D6.006 PREPARE EQUIPMENT FOR EMBARKATION
D6.007 ORGANIZE AND CONTROL DEPLOYMENT OF CONSTRUCTION
MATERIALS AND EQUIPMENT
D6.008 PERFORM CONSTRUCTION INSPECTIONS
E. CONSTRUCTION OPERATIONS
E6.001 COMPUTE SAFE WORKING LOAD (SWL) FOR COMPONENTS
OF SIMPLE LIFTING DEVICES
E6.002 DIRECT AND COORDINATE THE INSTALLATION OF
ADVANCED BASED FUNCTIONAL COMPONENT (ABFC)
FACILITIES
G. CONSTRUCTION COMBAT READINESS
G6.001 PREPARE ROUGH MAPS, FIELD SKETCHES AND OVERLAYS
G6.002 PERFORM DUTIES OF RIFLE SQUAD LEADER
G6.003 PERFORM DUTIES OF RIFLE PLATOON GUIDE
G6.004 PERFORM DUTIES OF RIFLE PLATOON PETTY OFFICER
G6.005 PERFORM DUTIES OF MACHINE GUN SQUAD LEADER
G6.006 PERFORM DUTIES OF ANTITANK SQUAD LEADER
G6.007 PERFORM DUTIES OF WEAPONS PLATOON
AMMO-TECHNICIAN/GUIDE
G6.008 PERFORM DUTIES OF WEAPONS PLATOON PETTY OFFICER
G6.009 DIRECT INSTALLATION OF PROTECTIVE AND TACTICAL
WIRE ENTANGLEMENTS
G6.010 INSTRUCT PERIMETER GUARDS
G6.011 DIRECT INSTALLATION OF TRIP FLARES AND OTHER
WARNING DEVICES
G6.012 DIRECT PLACING OF AIMING STAKES
J. PLANNING AND ESTIMATING
J6.001 PREPARE TIME, LABOR, MATERIAL AND COST
ESTIMATES
SWC
A. TECHNICAL ADMINISTRATION
A7.001 ADMINISTER PERSONNEL READINESS CAPABILITY
PROGRAM AND DETERMINE TRAINING BASED ON PRCP
DATA ANALYSIS
A7.002 MANAGE DEPLOYMENT OF MATERIALS AND EQUIPMENT
A7.003 MONITOR AND ADJUST LEVEL I AND LEVEL II PROJECT
PROGRESS CHARTS
A7.004 MONITOR WORK REQUESTS AND WORK ORDERS
A7.005 UTILIZE PERSONNEL READINESS CAPABILITY PROGRAM
(PRCP) DATA
B. MANAGEMENT AND SUPERVISION
B7.001 IMPLEMENT UTILITIES AND ENERGY CONSERVATION
PROGRAMS
C. ENVIRONMENTAL PROTECTION
C7.001 MANAGE ENVIRONMENTAL PROTECTION PROGRAMS AT
NAVAL CONSTRUCTION FORCE/PUBLIC WORKS (NCF/PW)
CONSTRUCTION SITES, WORK AREAS AND SHOPS
D. CONSTRUCTION SUPPORT
D7.001 MANAGE TURNOVER OF PROJECTS, MATERIALS AND
RELATED EQUIPMENT
D7.002 MANAGE PREPARATION OF MATERIALS AND EQUIPMENT
FOR EMBARKATION
D7.003 USE NETWORK ANALYSIS TO MANAGE CONSTRUCTION
PROJECTS
E. CONSTRUCTION OPERATIONS
E7.001 DIRECT AND COORDINATE INSTALLATION OF ADVANCED
BASE FUNCTIONAL COMPONENTS (ABFC)
F. QUALITY ASSURANCE
F7.001 ADMINISTER CONSTRUCTION QUALITY CONTROL
PROGRAMS
G. CONSTRUCTION COMBAT READINESS
G7.001 PERFORM DUTIES OF PLATOON COMMANDER
G7.002 COORDINATE OPERATIONS IN A COMPANY COMMAND POST
G7.003 DIRECT PREPARATION OF COMPANY DEFENSE PLANS
G7.004 COORDINATE OPERATIONS IN A COMMAND OPERATIONS
CENTER (COC)
G7.005 ASSIST IN PREPARATION OF BATTALION DEFENSE
PLANS
K. FINANCIAL CONTROL
K7.001 IMPLEMENT A FACILITIES MAINTENANCE COST CONTROL
PROGRAM
Index
