MINEMAN (MN)
Note: Below are listed responsibilities for grades E-4 (3) and E-7 (c) for this job. Paygrades E-1 through E-3 assist in these tasks
MN3
A. MINE ASSEMBLY/DISASSEMBLY
A4.001 REMOVE AND INSTALL MECHANISM SECTIONS
A4.002 REMOVE, DISASSEMBLE, ASSEMBLE, AND INSTALL
INSTRUMENT RACKS AND MAGNETOMETERS
A4.003 REMOVE AND INSTALL INITIATORS, EXPLOSIVE
ITTINGS, DRIVERS, AND BOOSTERS
A4.004 REMOVE AND INSTALL EXPLOSIVE SECTIONS
A4.005 REMOVE AND INSTALL SONAR TRANSMITTERS
A4.006 REMOVE AND INSTALL ARMING DEVICES
A4.007 REMOVE AND INSTALL FIRING MECHANISMS
A4.008 TORQUE MINE WATERTIGHT OPENINGS, COMPONENTS, AND
ACCESSORIES
A4.009 REMOVE AND INSTALL NOSE FAIRINGS, TAILS, FINS,
AND FLIGHT GEAR
A4.010 REMOVE AND INSTALL ANCHORS
A4.011 REMOVE AND INSTALL INTERCONNECTING CABLES AND
CABLE ASSEMBLIES
A4.012 ASSEMBLE, PROGRAM, AND INSTALL TARGET DETECTING
DEVICES (TDDs)
A4.013 REMOVE, DISASSEMBLE, ASSEMBLE, AND INSTALL GAS
GENERATORS
A4.014 ASSEMBLE MINE COMPONENTS INTO SUBASSEMBLIES,
READY PACKS, AND ACCESSORIES
A4.015 INSTALL STABILIZERS
A4.016 ASSEMBLE AND DISASSEMBLE BUOY, CABLE, AND DOOR
SYSTEMS
A4.017 ASSEMBLE AND DISASSEMBLE FLOAT AND SHIELD
SUBASSEMBLIES
A4.018 INSTALL STRONGBACKS ON MINES
B. ORDNANCE/COMPONENT MAINTENANCE/HANDLING
B4.001 PREPARE ORDNANCE AND AMMUNITION FOR UNDERWAY
REPLENISHMENT
B4.002 INSPECT MAGAZINES AND PYROTECHNIC LOCKERS, AND
RECORD TEMPERATURES
B4.003 DETECT AND TREAT CORROSION
B4.004 INSPECT, SCHEDULE TESTING, MAINTAIN TEST
RECORDS, AND SERVICE MATERIALS-HANDLING
EQUIPMENT (SLINGS, FORKLIFTS, CHAINFALLS, ETC.)
B4.005 CONFIGURE AND OPERATE ORDNANCE-HANDLING
EQUIPMENT (SLINGS, FORKLIFTS, CHAINFALLS, ETC.)
B4.006 MAINTAIN WEAPONS DOLLIES
B4.007 SET UP TEST SETS AND GROUND TEST EQUIPMENT FOR
MINE TESTING
B4.008 THAW, REMOVE, REPLACE, TEST, INSPECT, AND CHARGE
BATTERIES (UMN, MNS)
B4.009 CONDUCT CONTINUITY AND STRAY VOLTAGE CHECKS OF
MINES AND MINE COMPONENTS
B4.010 CONDUCT CLASS-B AND CLASS-C TESTS
B4.011 CONDUCT CYCLE MAINTENANCE OF MINES AND MINE
COMPONENTS
B4.012 CONDUCT MINE ENGINEERING CHANGE INSTRUCTIONS
(ECIs)
B4.013 RETAP MINE CASE FITTINGS
B4.014 REFURBISH FLOATS AND SHIELDS
B4.015 TEST ELECTRO-EXPLOSIVE DEVICES
B4.016 WELD SPOILERS TO MINES
B4.017 DRILL SONAR TRANSMITTER HOLES IN BOMB BODIES
B4.018 DRILL FAIRING HOLES IN MINES
B4.019 INSPECT MINES AND MINE COMPONENTS FOR PHYSICAL
DAMAGE, CORROSION, EXUDATE, ETC.
B4.020 REFURBISH UMN ORDNANCE (SANDING, CLEANING,
PAINTING)
B4.021 INSPECT SIGNALS
B4.022 PREPARE MINES FOR SHIPMENT
C. MINE WARFARE OPERATIONS
C4.001 PLACE IDENTIFYING MARKS ON MINES, EQUIPMENT, AND
COMPONENTS (STENCIL, TAG, LABEL, ETC.)
C4.002 MAKE FINAL OPERATIONAL SETTINGS ON ASSEMBLED
MINES
D. TECHNICAL ADMINISTRATION
D4.001 MAKE CORRECTIONS TO THE CIC CHART PORTFOLIO
D4.002 PREPARE MILITARY STANDARD (MILSTD) TAGS
D4.003 FILL OUT AND SUBMIT MINE MASTER RECORD SHEETS
D4.004 FILL OUT AND SUBMIT MINE-SYSTEM DATA REPORTS
E. QUALITY ASSURANCE
E4.001 PERFORM RECEIPT INSPECTION ON ORDNANCE
F. MAGAZINE AND FIRE SUPPRESSION SYSTEMS MAINTENANCE/OPERATIONS
F4.001 OPERATE AND PERFORM PREVENTIVE AND CORRECTIVE
MAINTENANCE ON MAGAZINE SPRINKLER SYSTEMS
F4.002 REPAIR SEALING SURFACES, MATING AREAS, AND
THREADS
H. MARLINESPIKE SEAMANSHIP
H4.001 APPLY WHIPPING TO LINES
H4.002 MAKE SPLICE IN LINES (EYE SPLICE, SHORT, LONG,
BACK)
H4.003 SEIZE BITTER END IN LINES OR WIRE ROPES
H4.004 COIL, FAKE, FLEMISH DOWN LINES
H4.005 SECURE LINES AND WIRES TO H-BITTS, BITTS, CLEATS
H4.006 MAKE LEADLINE
H4.007 MAKE STOPPERS (RAT-TAIL, CHAIN)
H4.008 SEW CANVAS/LEATHER BY HAND
H4.009 INSPECT LIFE LINES AND STANCHIONS
H4.010 INSPECT LINES AND WIRES FOR DETERIORATION
H4.011 TIE/UNTIE KNOTS, BENDS, HITCHES
H4.012 INSTALL WIRE ROPE CLIPS
H4.013 SPLICE LINES (DOUBLE-BRAIDED, KEVLAR, PLAITED,
ETC.)
H4.014 SPLICE WIRE ROPE (LIVERPOOL, LOCK-TUCK)
I. DECK SEAMANSHIP
I4.001 RIG/UNRIG, FOR MAN-OVERBOARD RECOVERY
(SHIPBOARD)
I4.002 RIG/UNRIG CAMELS, FENDERS
I4.003 RIG/UNRIG GANGWAYS/BROWS/PILOT'S LADDER
I4.004 RIG/UNRIG PORTABLE DAVITS
I4.005 RIG/UNRIG RAT GUARDS
I4.006 RIG/UNRIG SAFETY LINES
I4.007 RIG/UNRIG SAFETY NETS (SAVE ALL, GANGWAY, CARGO
HANDLING)
I4.008 RIG/UNRIG STAGES
I4.009 TEND/MAN LINES
I4.010 THROW A BOLO LINE
K. ANCHORING, MOORING, AND TOWING
K4.001 INSPECT GROUND TACKLE
K4.002 MAINTAIN GROUND TACKLE
K4.003 PREPARE GROUND TACKLE FOR MOORING TO A BUOY AND
ANCHORING
K4.004 DETERMINE STRAIN ON MOORING LINES
K4.005 PASS STOPPERS (RAT-TAIL/CHAIN)
K4.006 RECEIVE/RELAY AND PERFORM LINE HANDLING COMMANDS
K4.007 SECURE ANCHORS
K4.008 DROP/HAUL IN ANCHORS
K4.009 SLIP ANCHORS
K4.010 OPERATE CAPSTANS
L. UNDERWAY REPLENISHMENT (UNREP)
L4.001 RIG/UNRIG LIGHT LINE TRANSFERS
L4.002 RIG/UNRIG PHONE DISTANCE LINES
L4.003 SEND/RECEIVE UNREP HAND SIGNALS
L4.004 RIG/UNRIG FUELING STATIONS
L4.005 RIG/UNRIG HIGHLINE FOR TRANSFER OF PERSONNEL OR
CARGO
L4.006 TEST/INSPECT REFUELING HOSES
M. BOAT SEAMANSHIP
M4.001 COMMUNICATE BY USING BOAT HAILS AND RECALLS
M4.002 CARRY OUT BOAT ETIQUETTE
M4.003 FOLLOW INTERNATIONAL AND INLAND RULES OF THE
ROAD
M4.004 READ SIGNAL FLAGS/SIGNAL LIGHTS/SIGNAL FLARES
M4.005 INTERPRET NAVIGATIONAL SOUND SIGNALS
M4.006 SECURE BOATS FOR SEA/HEAVY WEATHER
M4.007 RIG/UNRIG BOATS FOR EMERGENCIES (MAN OVERBOARD,
BOARDING, RESCUE AND ASSISTANCE, ETC.)
M4.008 USE COMPASSES AND CHARTS
M4.009 IDENTIFY NAVIGATIONAL BUOYS, LIGHTS, AND SOUND
SIGNALS
M4.010 RIG/UNRIG SEA PAINTERS
N. PAINTING AND PRESERVATION
N4.001 MIX/LAY NONSKID
N4.002 OPERATE PAINT/CORROSION REMOVAL TOOLS
N4.003 OPERATE PAINT APPLICATION EQUIPMENT
N4.004 PREPARE SURFACE FOR INTERIOR AND EXTERIOR
PAINTING
N4.005 PROPERLY DISPOSE OF PAINT WASTE MATERIALS
O. SEARCH AND RESCUE OPERATIONS
O4.001 MAINTAIN SPECIAL PLOTS (SAR, DOWNED PILOT, CBR,
MAN OVERBOARD, ETC.)
P. BOAT HANDLING AND SMALL-BOAT OPERATIONS
P4.001 INVENTORY AND INSPECT BOAT EQUIPAGE
P4.002 INSPECT BOAT STOWAGE
P4.003 CONDUCT SMALL-BOAT TOWING (ASTERN, ALONGSIDE)
P4.004 LOAD/OFF-LOAD SMALL BOATS
Q. TACTICAL SUPPORT OPERATIONS
Q4.001 MAINTAIN VERTICAL AND HORIZONTAL PLOTS
(DRT/DDRT, MANEUVERING BOARD, REMOTE MONITORS)
Q4.002 IDENTIFY, CORRELATE, AND UPDATE CONTACTS GAINED
FROM RADAR, ESM, ACOUSTICS, ETC.
R. NAVIGATION
R4.001 PLOT PRECISION ANCHORAGE
R4.002 ESTABLISH SHIP'S POSITION DURING
HARBOR/COASTAL/OPEN OCEAN NAVIGATION
R4.003 CALCULATE SET/DRIFT AND COMPENSATING/CORRECTING
COURSES
R4.004 MAINTAIN NAVIGATIONAL LOGS
R4.005 INTERPRET FOG AND WHISTLE SIGNALS IN ACCORDANCE
WITH THE NAVIGATIONAL RULES OF THE ROAD
R4.006 SOLVE MANEUVERING BOARD PROBLEMS (AVOIDING
COURSE, CHANGE OF STATION, AND WIND)
S. ELECTRICAL AND ELECTRONIC SYSTEMS OPERATIONS
S4.001 PERFORM/INTERPRET BUILT-IN TEST EQUIPMENT (BITE)
DIAGNOSTIC PROCEDURES
S4.002 PERFORM OPERATIONAL TESTS AND ADJUSTMENTS ON
EQUIPMENT
S4.003 REPORT RADAR MALFUNCTIONS
S4.004 OPERATE RADAR SYSTEMS AND IDENTIFICATION FRIEND
OR FOE (IFF) EQUIPMENT
S4.005 REPLACE CONSUMABLE PARTS ON SONAR SYSTEMS
(PAPER, STYLI)
T. COMMUNICATIONS
T4.001 INTERPRET/REPORT MEACONING, INTRUSION, JAMMING,
AND INTERFERENCE (MIJI) INTERNALLY
T4.002 PERFORM AUTHENTICATION PROCEDURES
T4.003 ENCODE/DECODE COMMUNICATIONS
T4.004 SETUP CIC SPEAKERS IN ACCORDANCE WITH THE CIC
DOCTRINE/COMMUNICATIONS PLAN
T4.005 PERFORM INTERNAL/EXTERNAL COMMUNICATIONS
T4.006 CONDUCT COMMUNICATIONS USING RADIO TELEPHONE
EQUIPMENT
T4.007 MAINTAIN RADIOTELEPHONE (R/T) LOGS
T4.008 MAKE RECOMMENDATIONS TO COMPLY WITH TACTICAL
SIGNALS
T4.009 SET EQUIPMENT CONDITIONS ACCORDING TO EMISSION
CONTROL (EMCOM) PLANS
U. SMALL ARMS/SECURITY FORCES EQUIPMENT
U4.001 INVENTORY, STOW, AND ISSUE SMALL ARMS
U4.002 LOAD, FIRE, AND UNLOAD SMALL ARMS
U4.003 PERFORM PREFIRE AND POST FIRE CHECKS
U4.004 LOAD, FIRE, AND UNLOAD PYROTECHNIC DEVICES AND
PERSONNEL DISTRESS SIGNAL KIT
U4.005 LAUNCH MARINE LOCATION MARKERS
U4.006 OPERATE SMOKE AND ILLUMINATION SIGNALS
U4.007 OPERATE THE MK 1 MODS 0 AND 1 NAVY LIGHTS
U4.008 HANDLE, STOW, PACKAGE, UNPACKAGE, AND INVENTORY
MNS DESTRUCTORS, PYROTECHNIC AMMUNITION, AND
SMALL ARMS AMMUNITION
U4.009 ASSEMBLE AND DISASSEMBLE MNS MISSION PACKAGES
U4.010 FIELD STRIP, CLEAN, AND INSPECT SMALL ARMS AND
GRENADE LAUNCHERS
V. SONAR OPERATIONS
V4.001 PERFORM PRE-UNDERWAY OPERATIONAL CHECKS
V4.002 PERFORM PRE-WATCH INSPECTIONS
V4.003 RELIEVE A SONAR WATCH
V4.004 CONDUCT SEARCHES ON MINE-HUNTING SONAR SYSTEMS
(MHSS)
V4.005 TRACK CONTACTS ON MHSS
V4.006 CLASSIFY SONAR CONTACTS ON MHSS
V4.007 VECTOR MINE NEUTRALIZATION VEHICLE (MNV) TO
CONTACT USING MHSS
V4.008 IDENTIFY CONTACT USING THE MNS
V4.009 STAND WATCH ON FATHOMETER
V4.010 REPORT AND LOG SONAR CONTACTS
V4.011 CONDUCT XBT/XSV DROPS AND LOG INFORMATION
V4.012 COMPUTE ACTIVE SONAR RANGES
V4.013 OPERATE SONAR TO CONDUCT CONDITIONS CHECK
W. MECHANICAL SYSTEMS OPERATION
W4.001 OPERATE TOWED MINE-HUNTING CABLE SYSTEMS
W4.002 START UP HYDRAULIC PUMPS AND MOTORS
W4.003 DEPLOY AND RECOVER MNV
W4.004 RIG/STREAM/RECOVER MINE SWEEPING EQUIPMENT
MN2
B. ORDNANCE/COMPONENT MAINTENANCE/HANDLING
B5.001 SUPERVISE HANDLING OF AMMUNITION
C. MINE WARFARE OPERATIONS
C5.001 PERFORM (OR STATE IF NOT APPLICABLE TO MISSION)
DUTIES AS A MEMBER OF A MINE WARFARE (MIW) TEAM
C5.002 PERFORM FINAL INSPECTIONS AND MAKE FINAL
OPERATIONAL SETTINGS ON ASSEMBLED MINES
C5.003 SET HAZARDOUS RADIATION SAFEGUARDS (RADHAZ/HERO)
D. TECHNICAL ADMINISTRATION
D5.001 PREPARE AMMUNITION REQUISITIONS AND MAINTAIN
AMMUNITION STOCK RECORD CARDS
D5.002 PREPARE AND UPDATE SONAR SEARCH PLANS AND
MESSAGES
D5.003 PREPARE MATERIAL AND EQUIPMENT FOR MINE-HUNTING
OPERATIONS (Q-ROUTE SURVEYS, OVERLAYS)
D5.004 RECOMMEND ADDITIONS, DELETIONS, AND CHANGES TO
MINE BILL OF MATERIALS (MBOM)
D5.005 PREPARE DISCREPANCY REPORTS (WORKMANSHIP,
SAFETY, ETC.)
D5.006 REVIEW AND SUBMIT INVENTORY, SUPPLY, AND
MAINTENANCE REPORTS OF MINES AND ASSOCIATED
EQUIPMENT
D5.007 INSTRUCT ON HANDLING AND STOWING OF AMMUNITION,
EXPLOSIVES, AND OTHER HAZARDOUS MATERIALS
D5.008 COMPUTE LIFE OF MINE BATTERIES
E. QUALITY ASSURANCE
E5.001 PERFORM QUALITY ASSURANCE INSPECTIONS
E5.002 PERFORM RECEIPT INSPECTION ON VARIOUS EXPLOSIVE
ORDNANCE ITEMS, STOWED AMMUNITION, UNDERWATER
MINES AND MINE RELATED MATERIAL
E5.003 RECOGNIZE AND DEFINE THE DIFFERENT
SERVICEABILITY CLASSIFICATIONS OF EXPLOSIVE
ORDNANCE(CONDITION CODE)
E5.004 CONDUCT THE SPECIAL PROCEDURES AND REQUIREMENTS
FOR THE HANDLING AND DISPOSING OF DAMAGED OR
RECLASSIFIED AMMUNITION
E5.005 VERIFY ADHERENCE TO STANDARD INSPECTION
PROCEDURES DURING MINE ASSEMBLY AND DISASSEMBLY
G. MINE MANAGEMENT AND SUPERVISION
G5.001 PLAN AND SUPERVISE AMMUNITION STOWAGE IN
SECURITY MAGAZINES AND READY SERVICE LOCKERS
G5.002 COMPLETE AN INVENTORY OF AMMUNITION STOCKS
G5.003 ORDER PARTS, TOOLS, SUPPLIES, AND EQUIPMENT, AND
TURN IN REPAIRABLES
G5.004 VERIFY SPARE PARTS SUPPORT IN COORDINATED
SHIPBOARD ALLOWANCE LIST (COSAL)
G5.005 SUBMIT COSAL ALLOWANCE CHANGE REQUESTS
G5.006 INSTRUCT CREWS IN TRANSFERRING, HANDLING AND
STOWAGE OF AMMUNITION, PYROTECHNICS, AND
EXPLOSIVES
G5.007 SCREEN MINE COMPONENTS TO DETERMINE REPAIR
CAPABILITY
G5.008 PACKAGE MINE COMPONENTS FOR STORAGE
G5.009 PACKAGE AND PROCESS REPAIRABLES FOR TURN-IN
G5.010 INITIATE AND SCREEN MINE WORK ORDERS
H. MARLINESPIKE SEAMANSHIP
H5.001 DESIGN/MAKE CANVAS COVERS (BOAT, AWNINGS,
CASINGS, ETC.)
I. DECK SEAMANSHIP
I5.001 REMOVE/REPLACE BOAT DAVIT FALLS
I5.002 INSPECT STANDING RIGGING
I5.003 THROW/READ LEAD LINES
J. CARGO HANDLING
J5.001 COORDINATE OPERATION OF WINCHES
J5.002 ON-LOAD/OFF-LOAD CARGO USING A YARD AND STAY
RIG/SWINGING BOOM
K. ANCHORING, MOORING, AND TOWING
K5.001 RIG FOR TOWING AND BEING TOWED
K5.002 SEND/RECEIVE TOWING HAWSER
K5.003 PREPARE FOR GETTING UNDERWAY FROM AND MOORING TO
A PIER
L. UNDERWAY REPLENISHMENT (UNREP)
L5.001 SUPERVISE OPERATIONS FOR UNDERWAY REPLENISHMENT
L5.002 OPERATE LIGHT LINE TRANSFERS
L5.003 RECEIVE STERN REFUELING RIG
L5.004 PERFORM SAFETY INSPECTIONS OF RIGGING AND
OPERATION OF UNDERWAY REPLENISHMENT STATIONS
O. SEARCH AND RESCUE OPERATIONS
O5.001 SUPERVISE OPERATIONS FOR SEARCH AND RESCUE (SAR)
O5.002 SUPERVISE OPERATIONS FOR MAN OVERBOARD
P. BOAT HANDLING AND SMALL BOAT OPERATIONS
P5.001 RAISE/LOWER SMALL BOATS
P5.002 LAUNCH/RECOVER SMALL BOATS
P5.003 INSPECT LIFE RAFTS FOR PROPER STOWAGE
R. NAVIGATION
R5.001 PLOT AND UPDATE Q-ROUTES
R5.002 PERFORM DUTIES AS A NAVIGATIONAL PLOTTER DURING
SEA & ANCHOR DETAIL
R5.003 MAKE NAVIGATIONAL RECOMMENDATIONS USING
INTERNATIONAL AND INLAND RULES OF THE ROAD
T. COMMUNICATIONS
T5.001 IDENTIFY COUNTERMEASURES TO RESPOND TO MIJI
T5.002 DRAFT OPERATIONAL REPORTS AND MESSAGES (OPREP,
SITREP, MIW)
V. SONAR OPERATIONS
V5.001 EVALUATE RESULTS OF XBT/XSV DROPS
V5.002 DETERMINE CONTACT CONFIDENCE /PRIORITY LEVELS
V5.003 RECOMMEND OWN SHIP CHANGE IN COURSE/SPEED
V5.004 RECOMMEND TACTICAL EMPLOYMENT OF MINE HUNTING
SONAR (MHS)
Y. CORRECTIVE MAINTENANCE
Y5.001 REMOVE/REPLACE FAULTY ELECTRONIC/ELECTRIC
COMPONENTS ON SONAR SYSTEMS, MINE NEUTRALIZATION
SYSTEM (MNS), AND RELATED AUXILIARY EQUIPMENT
Y5.002 SOLDER/DESOLDER ELECTRONIC/ELECTRICAL COMPONENTS
MN1
D. TECHNICAL ADMINISTRATION
D6.001 PREPARE AND SUBMIT REPORTS, CHANGES TO REPORTS,
AND WORK PACKAGES
D6.002 MAINTAIN THE STANDARDIZED CONVENTIONAL
AMMUNITION AUTOMATED INVENTORY RECORDS (SCAAIR)
D6.003 REVIEW THE ACCOUNTABILITY AND INVENTORY
REQUIREMENTS FOR SMALL ARMS
D6.004 INSTRUCT AND MONITOR PERSONNEL IN CIC PROCEDURES
AND EQUIPMENT OPERATION
D6.005 INSTRUCT PERSONNEL IN RULES OF THE ROAD
D6.006 CONDUCT LOOKOUT TRAINING
D6.007 PREPARE MINE MASTER RECORD SHEETS
D6.008 REVIEW AND SUBMIT MINE-SYSTEM DATA REPORTS
D6.009 REVIEW AND SUBMIT PERFORMANCE REPORTS OF MINES
AND ASSOCIATED EQUIPMENT
D6.010 REVIEW AND SUBMIT INSPECTION REPORTS OF MINES
AND ASSOCIATED EQUIPMENT
D6.011 PREPARE AND MAINTAIN MINE ASSEMBLY FLOW CHARTS
D6.012 INTERPRET MINE FIELD PLANNING FOLDERS AND MINE
SETTING SHEETS
G. MINE MANAGEMENT AND SUPERVISION
G6.001 PREPARE PLANNED MAINTENANCE SYSTEM (PMS)
MAINTENANCE SCHEDULES AND REVIEW COMPLETED
MAINTENANCE DATA SYSTEM (MDS) FORMS
G6.002 INITIATE SURVEYS AND DAMAGED SHIPMENT REPORTS
G6.003 REVIEW MINE WORK REQUESTS/ORDERS
G6.004 DIRECT FINAL PREPARATION OF MINES FOR PLANTING
G6.005 COORDINATE MOVEMENT OF EXPLOSIVES WITHIN THE
COMMAND
G6.006 DIRECT MINE MAINTENANCE, ASSEMBLY, AND
DISASSEMBLY OPERATIONS
G6.007 DIRECT MAINTENANCE AND UPKEEP OF MAGAZINE AND
WORK SPACES
G6.008 DIRECT ASSEMBLY/DISASSEMBLY OF MNS MISSION
PACKAGES
I. DECK SEAMANSHIP
I6.001 DIRECT SALVAGE AND RESCUE OPERATIONS
J. CARGO HANDLING
J6.001 INSTRUCT PERSONNEL ON SAFE CARGO-HANDLING
PROCEDURES
J6.002 PERFORM SAFETY INSPECTIONS ON CARGO-HANDLING
EQUIPMENT
Q. TACTICAL SUPPORT OPERATIONS
Q6.001 SET UP CIC FOR CONDITIONS OF READINESS (GQ,
1M/MH, 2M/MH)
Q6.002 SUPERVISE CIC COMMUNICATIONS
R. NAVIGATION
R6.001 PERFORM DUTIES AS A PILOTING OFFICER
R6.002 PERFORM DUTIES AS A SHIPPING OFFICER
S. ELECTRICAL AND ELECTRONIC SYSTEMS OPERATIONS
S6.001 SUPERVISE CIC DURING MINE WARFARE OPERATIONS
T. COMMUNICATIONS
T6.001 MONITOR COMPLIANCE WITH THE PHYSICAL SECURITY
REQUIREMENTS FOR THE HANDLING AND STOWAGE OF
CLASSIFIED MATERIAL
T6.002 IMPLEMENT EMERGENCY DESTRUCTION PROCEDURES IN
ACCORDANCE WITH THE CIC DOCTRINE
T6.003 DIRECT IMPLEMENTATION OF THE COMMUNICATIONS PLAN
T6.004 EVALUATE MEACONING, INTRUSION, JAMMING, AND
INTERFERENCE (MIJI)
V. SONAR OPERATIONS
V6.001 PERFORM ACTIONS OF SONAR SUPERVISOR DURING MIW
CONDITIONS
MNC
D. TECHNICAL ADMINISTRATION
D7.001 ORGANIZE AND SUPERVISE MAINTENANCE OF A
TECHNICAL LIBRARY
D7.002 MONITOR SHIP/ORDNANCE ALTERATIONS AND PREPARE
REPORTS
D7.003 PREPARE CASUALTY REPORT
D7.004 PREPARE AND UPDATE THE CIC DOCTRINE
D7.005 DEVELOP TRAINING SCENARIOS IN PRIMARY/SECONDARY
WARFARE MISSION AREAS
D7.006 MONITOR COMPLIANCE WITH THE EMISSION CONTROL
(EMCON) PLAN
D7.007 PREPARE, REVIEW, AND SUBMIT QUARTERLY PERSONNEL
AND CONDITION REPORTS
D7.008 PREPARE QUARTERLY WORKLOAD SCHEDULE
G. MINE MANAGEMENT AND SUPERVISION
G7.001 COORDINATE SHIPBOARD HONORS AND CEREMONIES
G7.002 EVALUATE CASUALTIES AT UNDERWAY REPLENISHMENT
(UNREP) STATIONS
G7.003 INSTRUCT PERSONNEL IN NAVIGATION, RULES OF THE
ROAD, AND BOAT HANDLING
G7.004 REVIEW OVERHAUL WORK PACKAGES AND PLANNED
MAINTENANCE SCHEDULES
G7.005 COORDINATE ORDNANCE-HANDLING EQUIPMENT
INSPECTION AND WEIGHT TEST CRITERIA
G7.006 PREPARE STORAGE PLANS (ORDNANCE, INERT MATERIAL)
G7.007 COORDINATE MOVEMENT OF EXPLOSIVES AND INERT
MATERIALS ON AND OFF STATION
G7.008 SUPERVISE MINE BUILD-UP AND TEARDOWN
G7.009 SUPERVISE DEPARTMENTAL OPERATION OF A MOBILE
MINE ASSEMBLY GROUP (MOMAG) UNIT OR DETACHMENT
G7.010 COORDINATE FINAL PREPARATION TEAMS WITH PLANTING
AGENT
G7.011 SUPERVISE FANTAIL OPERATIONS DURING MINESWEEPING
EVOLUTIONS
Index
