MACHINIST'S MATE (SUBMARINE) (Weapons) - MMW(SUB)
Note: Below are listed responsibilities for grades E-4 (3) and E-7 (c) for this job. Paygrades E-1 through E-3 assist in these tasks
MM3 (SUB)
A. MECHANICAL SYSTEMS OPERATION
A4.001 RECORD EQUIPMENT OPERATING PARAMETERS
A4.002 LINE UP ORDNANCE LAUNCHING SUPPORT SYSTEMS
A4.003 OPERATE ORDNANCE LAUNCHING SUPPORT EQUIPMENT AND
RELATED SYSTEMS
A4.004 LINE UP AND OPERATE ANCHOR
B. MECHANICAL MAINTENANCE
B4.001 PERFORM PREVENTIVE MAINTENANCE ON LAUNCHING SUPPORT
EQUIPMENT AND RELATED SYSTEM
B4.002 PERFORM GREASING OPERATIONS
B4.003 DEMONSTRATE PROPER TOOL (COMMON AND SPECIAL) USAGE
B4.004 PERFORM TAGOUT PROCEDURES
C. QUALITY ASSURANCE
C4.001 DOCUMENT WORK ON QA FORMS
D. TECHNICAL ADMINISTRATION
D4.001 UPDATE TECHNICAL PUBLICATIONS
D4.002 DEMONSTRATE PROPER PROCEDURAL DOCUMENTATION PROCEDURES
D4.003 USE SHIP’S TECHNICAL DRAWINGS
D4.004 UPDATE DIVISIONAL LOGS AND RECORDS
D4.005 PREPARE TORPEDO MAINTENANCE DATA FORMS
D4.006 DESCRIBE ADMINISTRATIVE SECURITY PROCEDURES
E. MATERIAL CASUALTY/DAMAGE CONTROL
E4.001 PARTICIPATE IN SHIP DAMAGE CONTROL AND CASUALTY
DRILLS/EXERCISES
E4.002 USE SHIP’S DAMAGE CONTROL EQUIPMENT
E4.003 PERFORM TORPEDO/MISSILE CASUALTY AND FUEL CLEANUP
PROCEDURES
E4.004 MAINTAIN FUEL SPILL KITS
G. ORDNANCE/COMPONENT MAINTENANCE/OPERATIONS
G4.001 DESCRIBE TORPEDO/MISSILE CHARACTERISTICS AND OPERATION
G4.002 PERFORM TORPEDO/MISSILE PREVENTIVE MAINTENANCE
G4.003 DEMONSTRATE AN UNDERSTANDING OF SHIP’S ORDNANCE SECURITY REQUIREMENTS
G4.004 MAINTAIN SECURITY FORCE EQUIPMENT
H. SMALL ARMS MAINTENANCE
H4.001 DESCRIBE THE PHYSICAL CHARACTERISTICS AND OPERATION OF SHIP’S SMALL ARMS
H4.002 PERFORM PREVENTIVE MAINTENANCE ON SHIP’S SMALL ARMS (PISTOLS, RIFLES, AND SHOTGUNS)
H4.003 DEMONSTRATE THE PROPER USE AND MAINTENANCE OF THE LINE THROWING RIFLE ADAPTER KIT
I. TORPEDO TUBE EJECTOR SYSTEM MAINTENANCE/OPERATIONS
I4.001 DESCRIBE TORPEDO TUBE CHARACTERISTICS AND OPERATION
I4.002 PERFORM TORPEDO TUBE PREVENTIVE MAINTENANCE
I4.003 DESCRIBE SIGNAL EJECTOR SYSTEM CHARACTERISTICS AND OPERATION
I4.004 PERFORM SIGNAL EJECTOR PREVENTIVE MAINTENANCE
I4.005 DESCRIBE PYROTECHNIC/COUNTERMEASURES CHARACTERISTICS
AND OPERATION
J. VERTICAL LAUNCH SYSTEM MAINTENANCE
J4.001 DESCRIBE VERTICAL LAUNCH SYSTEM PHYSICAL CHARACTERISTICS
AND OPERATION
K. TEST EQUIPMENT MAINTENANCE/OPERATION
K4.001 DESCRIBE OTTO FUEL II DETECTOR PHYSICAL CHARACTERISTICS
AND OPERATION
K4.002 CLEAN, INSPECT, AND TEST OTTO FUEL II DETECTORS
K4.003 DESCRIBE MK 75 AND AURES MISSILE SIMULATOR PHYSICAL
CHARACTERISTICS AND OPERATION
K4.004 DESCRIBE VERTICAL LAUNCH SYSTEM CALIBRATION TEST SET
PHYSICAL CHARACTERISTICS AND OPERATION
L. WEAPONS HANDLING/EQUIPMENT MAINTENANCE/OPERATIONS
L4.001 EXPLAIN GENERAL SAFETY RULES ASSOCIATED WITH ALL SHIP
ORDNANCE, AMMO, AND PYROTECHNICS
L4.002 PERFORM RECEIPT INSPECTIONS ON ALL SHIP ORDNANCE, AMMO,
AND PYROTECHNICS
L4.003 PERFORM MAINTENANCE ON WEAPONS HANDLING EQUIPMENT
L4.004 CONDUCT PRIOR-TO-USE INSPECTIONS ON HANDLING SYSTEMS
AND INTERLOCKS
L4.005 DETERMINE THE CURRENCY OF WEAPONS HANDLING WEIGHT TESTS
M. MAGAZINE MAINTENANCE/OPERATIONS
M4.001 EXPLAIN MAGAZINE OPERATION PROCEDURES
M4.002 EXPLAIN MAGAZINE INSPECTION PROCEDURES
M4.003 PERFORM MAGAZINE FLOODING TEST IAW APPLICABLE MRC
N. ELECTRICAL/ELECTRONIC MAINTENANCE
M4.001 EXPLAIN MULTIMETER AND MEGGER SAFETY, THEORY, AND
OPERATION
MM2 (SUB)
A. MECHANICAL SYSTEMS OPERATION
A5.001 PERFORM ADJUSTMENTS ON ORDNANCE LAUNCHING SUPPORT
EQUIPMENT
B. MECHANICAL MAINTENANCE
B5.001 PERFORM INSPECTION PROCEDURES ON ORDNANCE LAUNCHING
SUPPORT EQUIPMENT
B5.002 PERFORM TAGOUT AUDITS
C. QUALITY ASSURANCE
C5.001 PREPARE QA FORMS
C5.002 PREPARE CONTROL WORK PACKAGES
C5.003 PREPARE AND SUBMIT DEPARTURE FROM SPECIFICATIONS FORMS
C5.004 CONDUCT ACCEPTANCE INSPECTIONS ON CONTROLLED MATERIAL
D. TECHNICAL ADMINISTRATION
D5.001 PREPARE 3-M FORMS (2K, 2L, CK, ETC.)
D5.002 PERFORM WORK CENTER SAFETY INSPECTIONS
D5.003 COMPLETE AND SUBMIT DAILY MAGAZINE/SMALL ARMS REPORTS
D5.004 MAINTAIN AMMUNITION LOT/LOCATION CARDS
D5.004 PREPARE AND SUBMIT SUPPLY REQUISITIONS
H. SMALL ARMS MAINTENANCE
H5.001 COORDINATE QUALIFICATION FIRINGS FOR SECURITY FORCES
I. TORPEDO TUBE/SIGNAL EJECTOR SYSTEM MAINTENANCE/OPERATIONS
I5.001 OPERATE TORPEDO TUBES (STARTUP, NORMAL, AND EMERGENCY
PROCEDURES)
I5.002 OPERATE SIGNAL EJECTOR (STARTUP, NORMAL, AND EMERGENCY
PROCEDURES)
J. VERTICAL LAUNCH SYSTEM MAINTENANCE
J5.001 OPERATE VERTICAL LAUNCH SYSTEM (STARTUP, NORMAL, AND
EMERGENCY PROCEDURES)
K. TEST EQUIPMENT MAINTENANCE/OPERATION
K5.001 OPERATE TEST EQUIPMENT (OTTO FUEL II DETECTOR, VLS
CALIBRATION TEST SET, MK 75/AURES SIMULATOR, TOMAHAWK
MISSILE PRESSURIZATION TEST SETS)
L. WEAPONS HANDLING/EQUIPMENT MAINTENANCE/OPERATIONS
L5.001 INVENTORY AMMO/PYROTECHNICS
L5.002 PERFORM WEAPONS HANDLING EQUIPMENT PERIODIC/ANNUAL
INSPECTIONS
L5.003 MAINTAIN WEIGHT TEST LOG
M. MAGAZINE MAINTENANCE/OPERATIONS
M5.001 PERFORM MAGAZINE INSPECTIONS
MM1 (SUB)
B. MECHANICAL MAINTENANCE
B6.001 PERFORM INSPECTION AND TROUBLESHOOTING PROCEDURES ON
LAUNCHING SUPPORT EQUIPMENT AND RELATED SYSTEMS
C. QUALITY ASSURANCE
C6.001 CONDUCT QUALITY ASSURANCE AUDITS
C6.002 COORDINATE/MAINTAIN QA MATERIAL STORAGE SURVEILLANCES
AND SCHEDULES
D. TECHNICAL ADMINISTRATION
D6.001 DEVELOP PMS SCHEDULES
D6.002 PREPARE AMMUNITION TRANSACTION REPORTS
D6.003 DOCUMENT ORDALT/FIELD CHANGES
______ ______ D6.004 PREPARE DIVISIONAL TRAINING PLANS (SHORT AND LONG RANGE)
D6.005 MAINTAIN AND SUBMIT ORDNANCE DOCUMENTATION AND REPORTS
L. WEAPONS HANDLING EQUIPMENT MAINTENANCE/OPERATIONS
______ ______ L6.001 MAINTAIN NON-NUCLEAR EXPLOSIVES HANDLING CERTIFICATION
PROGRAM QUALIFICATIONS
MMC (SUB)
B. MECHANICAL MAINTENANCE
B7.001 SUPERVISE PREVENTIVE AND CORRECTIVE MAINTANANCE ON
LAUNCHING SUPPORT EQUIPMENT AND RELATED SYSTEMS
C. QUALITY ASSURANCE
C7.001 REVIEW AND APPROVE CONTROLLED WORK PACKAGES
D. TECHNICAL ADMINISTRATION
D7.001 REVIEW AND APPROVE 3-M DOCUMENTATION (SCHEDULES AND
FORMS)
D7.002 COORDINATE EXPLOSIVES SAFETY INSPECTIONS
D7.003 CONDUCT/COORDINATE AA&E PHYSICAL SECURITY SURVEYS
D7.004 REVIEW AND APPROVE DIVISIONAL TRAINING PLANS
D7.005 PREPARE AND SUBMIT CASREPS
E. MATERIAL CASUALTY/DAMAGE CONTROL
E7.001 CREATE, SCHEDULE, AND IMPLEMENT APPLICABLE DRILLS
E7.002 SUPERVISE DAMAGE CONTROL PARTIES
L. WEAPONS HANDLING/EQUIPMENT MAINTENANCE/OPERATIONS
L7.001 IMPLEMENT/SUPERVISE NON-NUCLEAR EXPLOSIVES HANDLING AND
CERTIFICATION PROGRAM
L7.002 COORDINATE WEAPONS HANDLING/EQUIPMENT OPERATIONS
Index
