MACHINI (MM)
Note: Below are listed responsibilities for grades E-4 (3) and E-7 (c) for this job. Paygrades E-1 through E-3 assist in these tasks
MM3 (SUB)
A. MECHANICAL SYSTEMS OPERATION
A4.001 OPERATE AUXILIARY EQUIPMENT AND SYSTEMS
A4.002 PERFORM LOG KEEPING ON OPERATING EQUIPMENT AND SYSTEMS
B. MECHANICAL MAINTENANCE
B4.001 PERFORM PREVENTIVE AND CORRECTIVE MAINTENANCE ON
AUXILIARY EQUIPMENT AND SYSTEMS
B4.002 DEMONSTRATE PROPER TOOL USAGE
B4.003 PARTICIPATE IN TAGOUT PROGRAMS
C. QUALITY ASSURANCE
C4.001 DOCUMENT WORK ON QA FORMS
C4.002 OBSERVE QA PROCEDURES AND QA FORM REQUIREMENTS
D. TECHNICAL ADMINISTRATION
D4.001 PREPARE LUBE OIL AND WATER REPORTS
D4.002 USE SHIP’S DRAWINGS AND DRAWING INDEX
D4.003 DRAW SYSTEM DIAGRAMS
E. MATERIAL CASUALTY CONTROL
E4.001 OPERATE DAMAGE CONTROL EQUIPMENT
E4.002 MAINTAIN DAMAGE CONTROL EQUIPMENT
MM2 (SUB)
B. MECHANICAL MAINTENANCE
B5.001 INSPECT AND REPLACE AUXILIARY SYSTEM COMPONENTS AND
AUXILIARY EQUIPMENT
B5.002 ADJUST AUXILIARY EQUIPMENT AND SYSTEMS
B5.003 TEST AUXILIARY EQUIPMENT AND AUXILIARY SYSTEM
COMPONENTS
B5.004 TROUBLESHOOT AUXILIARY EQUIPMENT AND SYSTEMS
C. QUALITY ASSURANCE
C5.001 PREPARE QA FORMS
C5.002 PREPARE CONTROLLED WORK PACKAGES
C5.003 PREPARE FORMAL WORK PACKAGES
C5.004 SUBMIT DEPARTURE FROM SPECIFICATION REPORTS
C5.005 CONDUCT ACCEPTANCE INSPECTIONS ON CONTROLLED MATERIAL
D. TECHNICAL ADMINISTRATION
D5.001 SUBMIT DEFERRED AND COMPLETED 2-KILOS
D5.002 SUBMIT CONFIGURATION CHANGE REQUESTS
D5.003 MAINTAIN DIVISIONAL LOGS/RECORDS
D5.004 SUBMIT SUPPLY REQUISITIONS
D5.005 VERIFY THE ACCURACY OF SYSTEM DIAGRAMS AND DRAWINGS
MM1 (SUB)
B. MECHANICAL MAINTENANCE
B6.001 SUPERVISE PREVENTIVE MAINTANCE ON AUXILIARY EQUIPMENT AND SYSTEMS
B6.002 SUPERVISE CORRECTIVE MAINTENANCE ON AUXILIARY EQUIPMENT AND SYSTEMS
B6.003 TROUBLESHOOT AUXILIARY EQUIPMENT AND SYSTEMS
C. QUALITY ASSURANCE
C6.001 PREPARE QA REPORTS
C6.002 PREPARE CONTROLLED WORK PACKAGES
C6.003 PREPARE FORMAL WORK PACKAGES
C6.004 SUBMIT DEPARTURE FROM SPECIFICATIONS PACKAGES
C6.005 CONDUCT ACCEPTANCE INSPECTIONS ON CONTROLLED MATERIAL
D. TECHNICAL ADMINISTRATION
D6.001 PREPARE PMS SCHEDULES
D6.002 SUBMIT DEFERRED AND COMPLETED 2-KILOS
D6.003 MAINTAIN DIVISIONAL LOGS AND RECORDS
______ ______ D6.004 PREPARE AND SUBMIT CONFIGURATION CHANGE REQUESTS
D6.005 VERIFY THE ACCURACY OF SYSTEM DIAGRAMS AND DRAWINGS
D6.006 SUBMIT SUPPLY REQUISITIONS
E. MATERIAL CASUALTY/DAMAGE CONTROL
______ ______ E6.001 SUPERVISE DAMAGE CONTROL TEAMS
MMC (SUB)
B. MECHANICAL MAINTENANCE
B7.001 COORDINATE PREVENTIVE MAINTENANCE ON AUXILIARY EQUIPMENT AND SYSTEMS
B7.002 COORDINATE CORRECTIVE MAINTENANCE ON AUXILIARY EQUIPMENT AND SYSTEMS
B7.003 TROUBLESHOOT AUXILIARY EQUIPMENT AND SYSTEMS
C. QUALITY ASSURANCE
C7.001 REVIEW QA REPORTS
C7.002 REVIEW CONTROLLED WORK PACKAGES
C7.003 REVIEW FORMAL WORK PACKAGES
C7.004 REVIEW DEPARTURE FROM SPECIFICATION PACKAGES
C7.005 REVIEW ACCEPTANCE INSPECTIONS ON CONTROLLED MATERIAL
D. TECHNICAL ADMINISTRATION
D7.001 REVIEW 3-M CYCLE, QUARTERLY, AND WEEKLY SCHEDULES
D7.002 REVIEW DEFERRED AND COMPLETED 2-KILOS
D7.003 REVIEW CONFIGURATION CHANGE REQUESTS
D7.004 COORDINATE SHIPALT ACCOMPLISHMENT
D7.005 REVIEW DIVISIONAL LOGS RECORDS
D7.006 REVIEW SUPPLY REQUISITIONS
D7.007 PREPARE CASREPS
E. MATERIAL CASUALTY/DAMAGE CONTROL
E7.001 SUPERVISE DAMAGE CONTROL PARTIES
Index
