ENGINEMAN (EN)
Note: Below are listed responsibilities for grades E-4 (3) and E-7 (c) for this job. Paygrades E-1 through E-3 assist in these tasks
EN3
A. MECHANICAL SYSTEMS OPERATIONS
______ ______ A4.001 ALIGN, OPERATE, AND SECURE DRAIN, BALLASTING,
AND DEBALLASTING SYSTEMS
______ ______ A4.002 ALIGN, OPERATE, AND SECURE STEAM SYSTEMS
______ ______ A4.003 ALIGN, OPERATE, AND SECURE FUEL OIL AND LUBE
OIL SYSTEMS
______ ______ A4.004 ALIGN, OPERATE, AND SECURE COOLING WATER
SYSTEMS
______ ______ A4.005 ALIGN, OPERATE, AND SECURE DISTILLING PLANTS
______ ______ A4.006 ALIGN, OPERATE, AND SECURE POTABLE WATER
SYSTEMS
______ ______ A4.007 ALIGN, OPERATE, AND SECURE AIR SYSTEMS
______ ______ A4.008 ALIGN, OPERATE, AND SECURE FIRE AND FLUSHING
SYSTEMS
______ ______ A4.009 ALIGN, OPERATE, AND SECURE AIR CONDITIONING AND
REFRIGERATION SYSTEMS
______ ______ A4.010 ALIGN, ADJUST, AND SECURE REDUCING STATIONS
______ ______ A4.011 RECORD PRESSURE AND TEMPERATURE READINGS
B. MECHANICAL MAINTENANCE
______ ______ B4.001 MAINTAIN FUEL AND LUBE OIL SYSTEMS
______ ______ B4.002 MAINTAIN AIR SYSTEMS
______ ______ B4.003 MAINTAIN STEAM SYSTEMS
______ ______ B4.004 MAINTAIN COOLING SYSTEMS
______ ______ B4.005 MAINTAIN HYDRAULIC SYSTEMS
______ ______ B4.006 MAINTAIN WINCHES, WINDLASSES, DAVITS, AND BOW
RAMPS
______ ______ B4.007 MAINTAIN MONORAILS, CONVEYORS, CRANES,
ESCALATORS AND ELEVATORS
______ ______ B4.008 MAINTAIN LAUNDRY, GALLEY, SCULLERY, MESS DECK
EQUIPMENT, AND HOT WATER HEATERS
______ ______ B4.009 MAINTAIN GASOLINE AND DIESEL ENGINES
______ ______ B4.010 MAINTAIN COUPLINGS, SHAFTS, STERN TUBES,
CLUTCHES, AND TRANSMISSIONS
______ ______ B4.011 MAINTAIN PROPELLER PITCH CONTROL UNITS
______ ______ B4.012 MAINTAIN REDUCTION GEARS
______ ______ B4.013 MAINTAIN FIREMAIN SYSTEMS
______ ______ B4.014 MAINTAIN STRIPPING, DRAIN, BILGE, AND TANK
SYSTEMS
______ ______ B4.015 MAINTAIN PUMPS
______ ______ B4.016 MAINTAIN VENTILATION SYSTEMS
______ ______ B4.017 MAINTAIN TOOLS
______ ______ B4.018 MAINTAIN REDUCING STATIONS
______ ______ B4.019 MAINTAIN SHIP'S WHISTLE
______ ______ B4.020 MAINTAIN AUXILIARY BOILERS
C. FABRICATION AND MANUFACTURING
______ ______ C4.001 FABRICATE FLEX HOSE ASSEMBLIES, GASKETS, AND
TUBING
D. POLLUTION CONTROL
______ ______ D4.001 PERFORM DRILLS
E. TECHNICAL ADMINISTRATION
______ ______ E4.001 MAINTAIN AND REVIEW LOGS, DRAWINGS, AND JSN
LOGS
F. MATERIAL CASUALTY CONTROL
______ ______ F4.001 TRAIN AND PARTICIPATE IN CASUALTY, OPERATION,
MAINTENANCE, AND REPAIR PROCEDURES
H. LABORATORY ANALYSIS
______ ______ H4.001 TAKE, TEST, AND TREAT WATER, FUEL, AND LUBE OIL
SAMPLES
EN2
A. MECHANICAL SYSTEMS OPERATIONS
______ ______ A5.001 ADJUST AIR CONDITIONING AND REFRIGERATION
SYSTEMS
______ ______ A5.002 ADJUST AIR COMPRESSORS
B. MECHANICAL MAINTENANCE
______ ______ B5.001 MAINTAIN AIR CONDITIONING AND REFRIGERATION
SYSTEMS
______ ______ B5.002 MAINTAIN STEAM AND DISTILLING SYSTEMS
______ ______ B5.003 MAINTAIN CARGO HATCHES, BOW RAMPS, CRANES,
ESCALATORS, DAVITS, CONVEYORS, AND ELEVATORS
______ ______ B5.004 MAINTAIN HYDRAULIC SYSTEMS
______ ______ B5.005 MAINTAIN CONDENSERS
______ ______ B5.006 MAINTAIN GASOLINE AND DIESEL ENGINES
______ ______ B5.007 MAINTAIN GOVERNORS, SPEED LIMITERS, AND
OVERSPEED TRIPS
______ ______ B5.008 MAINTAIN PITCH CONTROL UNITS
______ ______ B5.009 MAINTAIN FUEL AND LUBE OIL PURIFIERS
______ ______ B5.010 MAINTAIN AIR SYSTEMS
______ ______ B5.011 MAINTAIN MESS DECK, GALLEY, SCULLERY EQUIPMENT,
AND DUMBWAITERS
______ ______ B5.012 MAINTAIN LAUNDRY EQUIPMENT
______ ______ B5.013 MAINTAIN REDUCTION GEARS AND COMPONENTS
______ ______ B5.014 MAINTAIN SPECIAL TOOLS
C. FABRICATION AND MANUFACTURING
______ ______ C5.001 PERFORM BASIC LATHE OPERATIONS
E. TECHNICAL ADMINISTRATION
______ ______ E5.001 MAINTAIN RECORDS, LOGS, DIAGRAMS, REPORTS,
BRIEFS, AND BULLETINS
H. LABORATORY ANALYSIS
______ ______ H5.001 TEST WATER SAMPLES
I. QUALITY ASSURANCE
______ ______ I5.001 MANAGE AND SUPERVISE QA ASSIGNMENTS, MONITOR
AND ADVISE ON REPAIRS AND TESTS
EN1
B. MECHANICAL MAINTENANCE
______ ______ B6.001 INSTALL AND OPERATE OIL FLUSH SYSTEMS
E. TECHNICAL ADMINISTRATION
______ ______ E6.001 MAINTAIN MANUALS, LOGS, AND REPORTS
G. MANAGEMENT AND SUPERVISION
______ ______ G6.001 ANALYZE SHIP'S DRAWINGS AND MONITOR EQUIPMENT
OPERATIONAL TESTS
I. QUALITY ASSURANCE
______ ______ I6.001 PREPARE FORMS, REPORTS, AND INSPECTIONS
ENC
E. TECHNICAL ADMINISTRATION
______ ______ E7.001 PREPARE AND REVIEW CASREPS AND CASCORS
G. MANAGEMENT AND SUPERVISION
______ ______ G7.001 MAINTAIN LOGS AND ADVISE ON EQUIPMENT REPAIR
AND RELIABILITY
I. QUALITY ASSURANCE
______ ______ I7.001 CONDUCT, PREPARE, AND MONITOR QA PROGRAMS
Index
