|Army Service & Foreign Awards|
|REPUBLIC OF VIETNAM CAMPAIGN MEDAL|
Description: A gold six pointed star with rays, 32cm in diameter, superimposed by a White enameled star, 42cm in diameter, overall in center a Green disc, 18cm in diameter, with the outline of the Vietnamese Country with a Red flame of three rays between North and South Vietnam. On the reverse of the medal is a circle with a designation band containing the word "CHIEN-DICH" (Campaign) at the top and "BOI-TINH" (Medal) at the bottom. Across the center of the circle is the word "VIET-NAM".
Ribbon: The ribbon is 1 3/8 inches wide and consists of the following stripes: 1/16 inch Gherkin Green 67183; 3/16 inch White 67101; 5/16 inch Gherkin Green; 1/4 inch White; 5/16 inch Gherkin Green; 3/16 inch White; and 1/16 inch Gherkin Green.
Criteria: The Republic of Vietnam Campaign Medal is awarded to personnel who meet one of the following requirements:
a. Served in the Republic of Vietnam for six months during the period of 1 March 1961 and 28 March 1973.
b. Served outside the geographical limits of the Republic of Vietnam and contributed direct combat support to the Republic of Vietnam and Armed Forces for six months. Such individuals must meet the criteria established for the Armed Forces Expeditionary Medal (for Vietnam) or the Vietnam Service Medal, to qualify for the Republic of Vietnam Campaign Medal.
c. Six months service is not required for individuals who were wounded by hostile forces; killed in action or otherwise in line of duty; or captured by hostile forces.
Components: The following are authorized components:
a. Medal (regular size): Available commercially.
b. Medal (miniature size): Available commercially.
c. Ribbon: MIL-R-11589/15Available commercially.
d. Ribbon Attachment: MIL-R-41819/2Available commercially.
Background: a. The Secretary of Defense approved a request for approval of foreign awards to US Military personnel on 7 February 196As a result of this approval, the Republic of Vietnam Campaign Medal with device bar (1960- ) was awarded to US Armed Forces personnel by the Government of the Republic of Vietnam per Republic of Vietnam Armed Forces Order No. 48, dated 24 March 196The acceptance, criteria and description was announced in the Federal Register, Volume 31, No. 147, 30 July 1966 (Title 32, Code of Federal Regulation 47).
b. The Republic of Vietnam Armed Forces Memorandum 2655 prescribed there were two devices to be worn on the ribbon. The first device was for the period 8 March 1949 - 20 July 1954 and is not authorized for wear by American Military Personnel. The second period was from 1 January 1960 with the last period to be decided after the war was over. The ending period remains blank, since the Republic of Vietnam Government ceased to exist before the ending period was established. The devices for the medal are in two sizes - - the large size is 1 13/64 inches in width and is worn on the suspension ribbon of the full size decoration. The regular size is 19/32 inch wide and is worn on the miniature decoration and service ribbon bar.
c. Since the Republic of Vietnam Campaign Medal is a foreign award, it is not issued by the United States Government. The medal may be purchased from commercial sources.
Grapics Courtesy of United States Army Institute of Heraldry